第一，电力方面。电压380V是一般的门窗机械设备的正常的电压，频率50Hz，因此，火线和零线之间的连接就需要注意了。火线和零线要连接好，不然可能会引发事故。这个一般来讲，大多数的断桥铝门窗设备厂家通过颜色分辨，火线为黑色或者蓝色，零线为红色。如果火线接反了，只需要将两根换过来就好了。 第二，供气方面。由于门窗设备的压料要保证充足的供气量，这样就能更好的使用了，这是基础，来实现气缸压紧。正常情况下，断桥铝门窗设备的供气量和气压都是有固定的参数要求的，即供气流量要达到0.3，气压也要能够达到8个压。在有多个门窗设备的情况下，这保定网站建设  伺服液位仪  防撞墙模具 唐山护栏  钢纤维 天津除甲醛  保定铝型材就需要多准备一些储气罐，这个根据现实情况而定。如果气压达不到，门窗加工设备的精确度就会进出产生相应的一些影响，相应地加工效果也会发生一些偏离预想的现象。 第三，设备方面。断桥铝门窗设备种类很多，每一种设备又会有多种型号，或者多种设备部位不同等等。 First, electric power. Voltage 380V is the normal voltage and frequency 50Hz of general doors and windows mechanical equipment. Therefore, the connection between FireWire and zero line should be paid attention to. Fire line and zero line should be connected, otherwise it may cause an accident. Generally speaking, most manufacturers of broken aluminum doors and windows can be identified by color, with black or blue FireWire and zero line red. If the fire line is reversed, it's only necessary to exchange two. Second, gas supply. Because the pressure material of door and window equipment should ensure sufficient gas supply, it can be better used. This is the foundation to achieve cylinder compaction. Under normal conditions, the gas supply and pressure of the aluminum door and window equipment of the broken bridge are required by fixed parameters, that is, the gas supply flow is up to 0.3, and the pressure of the air pressure should be able to reach 8 pressure. When there are multiple doors and windows, this requires more gas storage tanks, depending on the actual situation. If the air pressure is not reached, the accuracy of the processing equipment of the door and window will have some influence, and some deviations will occur in the corresponding processing effect. Third, equipment. There are many kinds of equipment for broken aluminum doors and windows, and each type of equipment will have a variety of models, or different parts of equipment.